Contact Info:

MICAMAXX partial discharge monitoring solution using 1nF sensor

Product Category

MICAMAXX partial discharge monitoring solution using 1nF sensor

Iris Power’s MICAMAXX PD instrument set is capable of monitoring and analyzing low frequency PD pulses with high accuracy efficiency. In particular, the device can also monitor PD signals in the low frequency range of 3.5-20MHz, which has a very large noise amplitude.

PRODUCT INFORMATION

Partial Discharge (PD) monitoring is the monitoring of the condition of small sparks occurring at the internal voids or surfaces of the insulation of a winding or busbar. Discharge monitoring is especially important and necessary for the plant to help machines operate stably, operate continuously, increase reliability. Among the products on the market today, Iris Power ‘s MICAMAXX is considered the safest, most economical, and most effective solution – not only because of product quality, but also professional competence. S5T expert installation configuration.

Significance of installing MICAMAXX Kit to monitor partial discharge for equipment

The MICAMAXX unit with a low-frequency 1nF condenser sensor can both be used for continuous online monitoring, and can be used to collect and analyze periodic PD data. The purpose is to record partial discharge information in the insulation of monitored equipment, creating a trendline over time. If the PD condition shows signs of increasing sharply in a short time, the data will be analyzed in depth, thereby making a maintenance and repair plan for the device.

Lợi ích khi lắp đặt giải pháp giám sát và phân tích PD cho máy phát nhiệt điện và động cơ:

  • Monitor, collect and analyze PD data periodically or continuously.
  • Record information about partial discharge status according to the operating time of the machine until an abnormal phenomenon occurs.
  • After being analyzed in depth to find the root cause, the factory has the basis to develop an appropriate maintenance and repair plan.

Components of the PD system for installation of thermoelectric generators and engines

+ Hardware

The MICAMAXX equipment set includes:

  • Sensor 1nF

Partial Discharge Monitoring - Iris Power

Sensor 1nF

  • Data Collector MICAMAXX.

+ The MICAMAXX data collector can be used as a carry-on bag for periodic PD data collection, or as a permanent rack mount for continuous PD data collection.

Partial Discharge Monitoring - Iris Power

The MICAMAXX data collector periodically monitors PD Online

MICAMAXX- Low Frequency Partial Discharge Monitoring - Iris Power

The MICAMAXX data collector monitors PD Online continuously

+ Software

Web-based diagnostic software that can be used on a PC connected to the instrument, analyzes and reports PD status in insulation for high accuracy.

+ Service

The service collects and analyzes PD data periodically with a frequency based on the actual condition of the equipment being monitored, or continuously collects and analyzes it in depth when needed.

Procedure for installing periodic PD monitoring system MICAMAXX

Step 1: Survey and determine the installation location of the 1nF sensor, junction box.

Step 2: Make a construction plan to install the equipment at the surveyed locations.

Step 3: Connect and calibrate the signal, ensuring it is correct according to the company’s noise filtering technology.

Step 4: Get data from the junction box to the MICAMAXX collection device, connect it to a computer with its specialized software installed to provide PD analysis.

Why should you choose to install the Iris Power PD MICAMAXX surveillance system provided by S5T?

Why choose Iris Power’s MICAMAXX PD surveillance solution?

Applying advanced technology and years of experience in research into the world’s leading PD solutions, Iris Power’s MICAMAXX PD instruments are capable of monitoring and analyzing low-frequency PD pulses with precise efficiency. High. In addition to applying internal and external noise filtering, to focus on monitoring the PD signal in the 40-300MHz frequency range, the MICAMAXX receiver together with the Iris Power 1nF condenser sensor is also designed to monitoring PD signals in the low frequency range from 3.5-20MHz, which has a very large noise amplitude.

Why should you choose the PD system installation service provided by S5T?

S5T is not only an authorized dealer in Vietnam to distribute PD surveillance systems provided by Iris Power, but we are also an enterprise with full capacity and experience to bring customers the best solutions in the world

  • A team of experienced, well-trained experts with in-depth knowledge of partial discharge, experienced in construction, installation, configuration, test run and data analysis of PD for many projects large: installation of a continuous online monitoring system at Dong Nai 4 Hydropower Plant, periodic PD data collection and analysis system project at Air Liquid Vietnam, and many other projects).
  • Capable of capturing, consulting and building optimal solutions for partial discharge monitoring of IRIS POWER, especially MICAMAXX equipment and 1nF capacitor sensors for customers.
  • Helping customers monitor partial discharge status in the insulation layers of equipment, creating a basis for maintenance, repair, cost savings, and optimal efficiency.
  • S5T is always accompanied by the world’s leading team of partial discharge data analysts, and of IRIS POWER, ready to support customers anytime, anywhere.
  • Professional working process from consulting, design, installation, transfer, support to customer care.

For detailed advice on each periodical online PD monitoring solution suitable for plants, equipment, etc. Please connect with us by sending a request to the mailbox, or contact us at the following address:

  • Address: S5T Vietnam Technology and Solution Joint Stock Company.
  • Lot B15, Duong Noi Resettlement Area, Duong Noi, Ha Dong, Hanoi.
  • Tel: 0243 540 1858 – Fax: 0243 540 1859
  • Email: info@s5t.com.vn
Send a request for advice - purchase

Customers and partners need more advice about our products and services, please contact Hotline 0243 540 1858 or leave information for a free consultation.

Related Product

TẢI TÀI LIỆU

Vui lòng để lại thông tin bên dưới. Bạn sẽ nhận được ebook qua email.