Partial Discharge (PD) monitoring is the monitoring of the condition of small sparks occurring at the internal voids or surfaces of the insulation of a winding or busbar. Discharge monitoring is especially important and necessary for the plant to help machines operate stably, operate continuously, increase reliability. Among the products on the market today, Iris Power ‘s MICAMAXX is considered the safest, most economical, and most effective solution – not only because of product quality, but also professional competence. S5T expert installation configuration.
The MICAMAXX unit with a low-frequency 1nF condenser sensor can both be used for continuous online monitoring, and can be used to collect and analyze periodic PD data. The purpose is to record partial discharge information in the insulation of monitored equipment, creating a trendline over time. If the PD condition shows signs of increasing sharply in a short time, the data will be analyzed in depth, thereby making a maintenance and repair plan for the device.
Benefits of installing a PD monitoring and analysis solution for thermoelectric generators and engines:
MICAMAXX equipment set includes:
1nF . sensor
+ The MICAMAXX data collector can be used as a carry-on bag for periodic PD data collection, or as a permanent rack mount for continuous PD data collection.
The MICAMAXX data collector periodically monitors PD Online
The MICAMAXX data collector monitors PD Online continuously
Web-based diagnostic software that can be used on a computer connected to the instrumentation, analyzes and reports PD status in insulation for high accuracy.
The service collects and analyzes PD data periodically with a frequency based on the actual condition of the equipment being monitored, or continuously collects and analyzes it in depth when needed.
Step 1: Survey and determine the installation location of the 1nF sensor, junction box.
Step 2: Make a construction plan to install the equipment at the surveyed locations.
Step 3: Connect and calibrate the signal, ensuring it is correct according to the company’s noise filtering technology.
Step 4: Get data from the junction box to the MICAMAXX collection device, connect it to a computer with its specialized software installed to provide PD analysis.
Applying advanced technology and years of experience in research into the world’s leading PD solutions, Iris Power’s MICAMAXX PD instruments are capable of monitoring and analyzing low-frequency PD pulses with precise efficiency. High. In addition to applying internal and external noise filtering, to focus on monitoring the PD signal in the 40-300MHz frequency range, the MICAMAXX receiver together with the Iris Power 1nF condenser sensor is also designed to monitoring PD signals in the low frequency range from 3.5-20MHz, which has a very large noise amplitude.
S5T is not only an authorized dealer in Vietnam to distribute PD surveillance systems provided by Iris Power, but we are also an enterprise with full capacity and experience to bring customers the best solutions:
For detailed advice on each periodical online PD monitoring solution suitable for plants, equipment… Please connect with us by sending a request to the mailbox, or contact us at the following address:
Customers and partners need more advice about our products and services, please contact Hotline 0243 540 1858 or leave information for a free consultation.