Continuous partial discharge monitoring solution GUARD II+ 4208 IPB

GUARD II_4208_IPB

Continuous partial discharge monitoring solution GUARD II+ 4208 IPB

The GUARD II+ 4208 IPB system is used for bus lines (BusDuct) and isolated phase bus (IPB) to help monitor partial discharges effectively, safely and optimally today. The GUARD II+ 4208 IPB provides information to prevent serious problems, extend service life, increase equipment life, and minimize unplanned downtime.

PRODUCT INFORMATION

Table of Content

PD consists of many small sparks arising at openings or holes in or on the surface of the insulation. If PD occurs for a long time, it can seriously degrade insulation quality, even destroy the entire insulation layer, causing serious problems for electrical equipment. The GUARD II+ 4208 IPB system for bus lines (BusDuct) and isolated phase bus (IPB) of IRIS POWER is an economical solution to monitor Partial Discharge (PD). most effective, safe, optimal today.

Significance of installing the GUARD II+ 4208 IPB unit for partial discharge monitoring

The GUARD II+ 4208 IPB unit collects pulse voltage data from IRIS POWER’s EMC 80pF condenser sensor, and then uses specialized diagnostic software IAM and PDView to analyze the data. The GUARD II+ 4208 IPB provides information to prevent serious problems, extend service life, increase equipment life, and minimize unplanned downtime.

Benefits of installing GUARD II+ 4208 IPB monitoring solution for BusDuct and IPB:

  • The GUARD II+ 4208 IPB uses advanced automatic noise detection technology based on pulse geometry analysis and filtering to reliably distinguish partial discharges from electrical disturbances to prevent false alarms.
  • With PD alarms, users can review 24-window phased and pulse height analysis charts using basic interpretation to confirm the cause of the alarm.
  • The GUARD II+ 4208 IPB can operate a “standalone” system with only periodic downloading of stored partial discharge data, or it can be networked into the plant control system for data collection and analysis. remotely via USB, Ethernet or Modbus.
  • The alarm output uses a dedicated relay that can remotely trigger indication of high partial discharge alarm conditions, and can also be connected to a plant monitoring system.

Components of the system GUARD II+ 4208 IPB

+ Hardwares

GUARD II+ 4208 IPB equipment set includes:

  • Sensor EMCs

Sensor EMCs_EMCs

Sensor EMCs

  • Data Collector GUARD II+ 4208 IPB.

Data_Collector_GUARD II_4208_IPB

Data Collector GUARD II+ 4208 IPB

GUARD II_4208_IPB

Device health monitoring solution using GUARD II+ 4208 IPB . Data Collector

+ Software

IAM and PDView software are used to configure monitoring modules, store collected data, and view and trend device partial discharge monitoring data.

Administration_interface_of IAM_and_PDView_software

Administration interface of IAM and PDView software

+ Service

Continuous collection and analysis of PD data for electric motors, small generators, circuit breakers and isolated phase busbars with frequency depending on the actual condition of the equipment being monitored, or continuous collection and in-depth analysis as needed.

Operation_structure_of_GUARD_II_4208 IPB

Operation structure of GUARD II+ 4208 IPB

Installation process of periodic PD monitoring system GUARD II+ 4208 IPB

Step 1: Survey and determine the installation location of EMCs sensors, junction boxes.

Step 2: Organize the construction and installation of the hardware system.

Step 3: Set the signal for device health monitoring solutions.

Step 4: Collect data about the GUARD II+ 4208 IPB connected to a computer with its specialized software installed to provide analysis of the device status being monitored.

Why should you choose to install the Iris Power PD GUARD II+ 4208 IPB surveillance system provided by S5T?

Why choose Iris Power’s PD GUARD II+ 4208 IPB monitoring solution?

Besides applying PD monitoring solution with electrical noise filtering technology to monitor PD pulse leading in the world. The GUARD II+ 4208 IPB collector also helps monitor PD conditions in electric motors, small generators, circuit breakers and isolated phase conductors.

The results from the PDView software of the GUARD II+ 4208 IPB provide information on the location of insulation corrosion, busbar bushing loose, thermal insulation deterioration, and stator bus manufacturer fault detection. This data is the most reliable information available, referenced by the Iris Power severity table that includes a statistical evaluation of more than 700,000 machine tests globally to provide a relative health index. with similar machines.

Why should you choose the PD system installation service provided by S5T?

S5T is not only an authorized dealer in Vietnam to distribute PD surveillance systems provided by Iris Power, but we are also an enterprise with full capacity and experience to bring customers the best solutions. world today:

  • A team of experienced, genuine trained experts with in-depth understanding of partial discharge, experience in construction, installation, configuration, test run and data analysis of PD. Some typical projects such as: installation of a continuous online monitoring system at Dong Nai 4 Hydropower Plant, a project of periodic PD data monitoring, collection and analysis system at Air Liquid Vietnam, and many other projects).
  • Capture, consult and build the optimal solutions for partial discharge monitoring of IRIS POWER, especially the MCGUARD II equipment.
  • Helping customers most effectively monitor equipment condition under operating conditions including partial discharge monitoring, rotor flux, busbar end vibration… Create a basis for maintenance and repair the most cost-effective and efficient way.
  • S5T is always accompanied by the world’s leading team of partial discharge data analysts, and by IRIS POWER.
    Professional working process from consulting, design, installation, transfer, support to customer care.

For detailed advice on each periodical online PD monitoring solution suitable for plants, equipment, etc.

  • Address: S5T Vietnam Technology and Solution Joint Stock Company.
  • Lot B15, Duong Noi Resettlement Area, Duong Noi, Ha Dong, Hanoi.
  • Tel: 0243 540 1858 – Fax: 0243 540 1859
  • Email: info@s5t.com.vn

Send a request for advice - purchase

Customers and partners need more advice about our products and services, please contact Hotline 0243 540 1858 or leave information for a free consultation.

Galabet
Bonusum bonusum.com betting sites offering trial bonuses deneme bonusu
Free Porn
Cialis
Cialis Fiyat

TẢI TÀI LIỆU

Vui lòng để lại thông tin bên dưới. Bạn sẽ nhận được ebook qua email.